---
title: "Install BBR Acceleration on Debian to Improve Network Transfer Speed and Reduce Latency"
url: https://www.geekcorelab.cn/en-US/post/installing-bbr-acceleration-in-debian-improves-network
updated: 2026-11-02T03:37:02.460812Z
author: "hhjmk"
summary: "BBR加速是一种新型TCP拥塞控制算法，通过自适应调整拥塞窗口大小优化网络传输速度和减少延迟，性能优于传统算法。文章介绍了BBR加速的安装步骤，包括升级系统内核至4.9以上版本，通过modprobe tcp_bbr安装算法，并在sysctl.conf中配置启用。此外还提及BBR Plus或魔改版可提供更快的速度。该算法有效提升网络性能，尤其适用于解决网络拥堵和延迟问题。"
---

# Install BBR Acceleration on Debian to Improve Network Transfer Speed and Reduce Latency

With the continuous development of the Internet, we increasingly rely on the network for daily work and life. However, due to network instability and bandwidth limitations, we often encounter network congestion and latency issues. In this case, BBR acceleration can help us improve network transfer speed and reduce latency, allowing us to use the Internet more smoothly.

BBR acceleration is a new type of TCP congestion control algorithm. It can adaptively adjust the congestion window size according to network conditions, thereby optimizing network transfer speed and reducing latency. Compared with traditional TCP congestion control algorithms, BBR acceleration can more accurately perceive network bandwidth and congestion conditions, thereby better adjusting transfer speed and improving network performance.

**It can also improve the speed of circumventing internet censorship~**

Below are the specific steps to install BBR acceleration:

---

### **Step 1: Upgrade the system kernel**

First, you need to upgrade the system kernel to version **4.9** or later, because the BBR acceleration algorithm is only supported in kernels version 4.9 and above. You can use the following command to check the current system kernel version:

```
uname -r
```

If the current kernel version is lower than **4.9**, you need to upgrade the kernel. For specific upgrade methods, refer to the documentation of the corresponding Linux distribution or search for relevant tutorials.

---

### Step 2: Install the BBR acceleration algorithm

The BBR acceleration algorithm can be installed with the following command:

```
sudo modprobe tcp_bbr
```

If there is no error output, it means the BBR acceleration algorithm has been successfully installed.

---

### Step 3: Enable the BBR acceleration algorithm

Enabling the BBR acceleration algorithm requires modifying the system configuration file. You can open the configuration file with the following command:

```
sudo vim /etc/sysctl.conf
```

Add the following content to the configuration file:

```
net.core.default_qdisc=fqnet.ipv4.tcp_congestion_control=bbr
```

Save and exit the configuration file, then run the following command to make the configuration file take effect:

```
sudo sysctl -p
```

---

This installation is the original BBR acceleration. If you want it to be faster, you can install BBR Plus or a modified version, which is faster.

At this point, the BBR acceleration algorithm has been successfully enabled.
